Setting Mode - Omron V640 - MANUAL 2 User Manual

SECTION 5
Troubleshooting

■ Setting Mode

Error occurrence
POWER-LED is OFF
No
All LEDs are lit
or flashing.
No
Check if the CIDRW Controller settings are correct.
When the CIDRW Controller fails to respond to messages sent to it
When an error unrelated to message transmission and responses occurs
• Operating normally in the Setting mode
Indicators
POWER
Terminal initial screen of the host device after startup in the Setting mode
SETUP_START <L22 ><XXX.XX, YYY.YY>
_
Model number
Software Revision Level
Hardware Revision Level
Terminal screen when parameter setting has been completed without error
SETUP_COMPLETE
_
CIDRW System
96
User's Manual
Yes
Yes
OPERATING ALARMS
An error has occurred in the CIDRW Controller power supply.
Check the power supply of the CIDRW Controller.
An error has occurred at the CIDRW Controller.
Check the status of the indicators.
When all the LEDs are lit or flashing
BUSY ERROR
Refer to page 97.
Refer to page 97.
Refer to page 97.