Handy Ways Of Setting Functions - Omron E4C-UDA Instruction Manual

7. Handy Ways of Setting Functions

Setting the Display to Zero (zero reset)
Before making this setting, make sure that the "MODE key setting" is set to [0RST] (zero reset).
The default setting is [2PNT] (teaching with and without a workpiece). (Refer to "Function Transition Charts" in "5. Function
Overview.")
Setting method
Switch to the RUN mode.
SET RUN
Hold down the MODE key
for more than 3 seconds.
The current distance
display stops fluctuating.
Current distance Threshold
value
Setting the Display to Any Value (offset)
Before making this setting, make sure that the "MODE key setting" is set to [oFST] (offset).
The default setting is [2PNT] (teaching with and without a workpiece). (Refer to "Function Transition Charts" in "5. Function
Overview.")
Setting method
Switch to the RUN mode.
SET RUN
Hold down the MODE key
for more than 3 seconds.
The current distance
display stops fluctuating.
Current distance Threshold
value
Inverting the Increment/decrement Direction of the Main Display (display inversion)
When display inversion is executed, how the display to the reference distance is indicated is inverted.
Before making this setting, make sure that the MODE key setting is set to [0RST] (zero reset) or [oFST] (offset).
Setting method
SET RUN
+
(In the zero reset mode) (In the offset mode)
Current Threshold Current
distance value distance
Display inversion is
executed together
with the zero reset.
The zero reset is
executed, and the
current distance display
changes to "0".
Press the UP or DOWN
key to change the
current distance.
Press the MODE key to
execute offset.
Switch to the RUN mode.
Hold down the UP key for more
than 3 seconds with the MODE
key pressed.
Press the MODE key and then
immediately press the UP key.
Press the UP
or DOWN key
to change the
Threshold
current
value
distance.
Press the
MODE key to
execute display
inversion
together with
the offset.
Cancel method
SET RUN
+
Current distance Threshold
value
Cancel method
SET RUN
+
Current distance Threshold
value
Cancel method
SET RUN
+
Threshold
Current
value
distance
- 15 -
Switch to the RUN mode.
Hold down the DOWN key for more
than 3 seconds
with the MODE key pressed.
Press the MODE key and then
immediately press the DOWN key.
The zero reset is
canceled.
Switch to the RUN mode.
Hold down the DOWN key for more
than 3 seconds with the MODE key
pressed.
Press the MODE key and then
immediately press the DOWN key.
The offset is
canceled.
Switch to the RUN mode.
Hold down the UP key for more
than 3 seconds with the MODE
key pressed.
Press the MODE key and then
immediately press the UP key.
Both zero reset (offset) and
display inversion
canceled.
are