Trajexia Tools Interface; Introduction; Specifications And Connections; Pc Specifications - Omron TJ1-MC04 - PROGRAMMING 1 Programming Manual

Trajexia Tools interface

5 Trajexia Tools interface
5.1

Introduction

Trajexia Tools is the software tool that allows to program the Trajexia
system. This software allows the Application Engineer to handle Trajexia
projects and to edit programs. It includes some useful tools described later in
this chapter as, Run/Stop/Step individual programs, add breakpoints,
execute direct commands read/write variables, Oscilloscope functions and
program the Servo Drivers.
The connection to the TJ1-MC__ is via Ethernet. It is necessary to set the
communication settings before connecting to a unit.
The Trajexia Tools software tool has been designed to work on-line with one
TJ1-MC__.
The Trajexia Tools includes:
• The Software Tool for the TJ1-MC__ (Motion Perfect 2)
• CX-Server
• CX-Drive to program and setup the Servo Drivers and Inverter.
The Trajexia Tools can be used to program, via serial communication, other
OMRON motion controllers: C200HW-MC402E, R88A-MCW151-E and
R88A-MCW151-DRT-E.
5.2

Specifications and connections

5.2.1

PC Specifications

The PC specification for the use of Trajexia Tools are:
/i
Description Minimum specification
CPU Pentium 300MHz
RAM 64 MB
Hard drive space 140 MB
Operating system Windows TM 98
PROGRAMMING MANUAL
Recommended specifi-
cation
Pentium, 1GHz
256 MB
140 MB
Windows XP
Description Minimum specification
Display 800 x 600
256 colours
Communications Ethernet 10BaseT
Internet Explorer V5.0
Use the most recent version of Trajexia Tools. Updates are available from
your local distributor. The software is also available from the Trajexia web
site: www.trajexia.com.
Recommended specifi-
cation
1024 x 768
24-bit colour
Ethernet 100BaseT
Explorer V6.0
180