Omron TJ1-MC04 - PROGRAMMING 1 Programming Manual page 157

Communication protocols
Parameter Values (hex)
element_count 1 <= element_count <= number of variables - start_address
The TJ1-MC__ responds with these codes:
/i
Condition Response code
(hex)
All elements valid 0000
Var_type invalid 1101
Start_address invalid 1103
Number of elements invalid 1104
If var_type is 82 or B0, and the response code is 0000, the TJ1-MC__
responds with:
/i
01 01 00
command_code response_code
If var_type is C2, and the response code is 0000, the TJ1-MC__ responds
with:
/i
01 01 00
command_code response_code
Note
The returned words and dwords are in big-endian format.
Write command
The FINS write command has these formats:
PROGRAMMING MANUAL
Description
OK
No area type
Address range designation error
Address out of range
00
word_1 word_2
00
dword_1 ...
• If var_type is 82 or B0:
/i
01 02 ..
command_c var_
ode type
• If var_type is C2:
/i
01 02 C2
command_c var_t
ode ype
• If var_type is 30:
/i
01 02
command_ var_
code type
... The parameters can have the following values:
/i
Parameter
command_code
var_type
start_address
total_words
total_bits
bit
The TJ1-MC__ responds with these codes:
.. .. 00 ..
start_ fixed total_words
address
.. .. 00 .. ..
start_ fixed total_ words
address
30 .. .. 00 ..
start_ address bit_ total_bits
num
Values
01 02
• 82 (TABLE memory in 16-bit integer format)
• C2 (TABLE memory in 32-bit IEEE floating-point format)
• B0 (VR memory in 16-bit integer format)
• 30 (VR memory in bit format)
0 <= start_address <= number of variables - 1 <= FFFF
1 <= total_words <= memory size - start_address + 1
1
00 or 01
.. .. .. .. ..
word 1 ..
.. .. .. .. ..
dword 1 ..
.. .. ..
bit
157