Table of Contents
Advertisement
TMCM-1290-EVAL Evaluation Board • Hardware Version V1.00 | Rev 0, 01/24
14/18
4.2 Settings
The Settings tool allows to change basic axis-speci c settings. The main settings here are the motor run
current and standby current. The current settings should be adapted to the used motor.
Furthermore, the limit switches and the microstep resolution are con gured here.
Figure 8: Settings Tool
Advertisement
Table of Contents
Need help?
Do you have a question about the TMCM-1290-EVAL and is the answer not in the manual?
Questions and answers