Creating Steps And Transitions; Renaming Steps/Transitions - Omron SFC - INTRODUCTION GUIDE Introduction Manual

2-5

Creating Steps and Transitions

Create an SFC chart and set the transition conditions.

2-5-1 Renaming Steps/Transitions

When an SFC program is first created, two steps and a transition are displayed by default. Rename
these SFC elements, so that the program content can be understood more easily.
1 Rename the initial step.
By default, an initial step
and a step will be displayed in the SFC
view .
Steps define a process, and transitions define
the condition(s) for moving to the next
process.
The step with the double-line frame is the
initial step. Execution of an SFC chart begins
at the initial step.
In this example, the step represents the
parking gate system in the wait status.
Right-click Step1, and select Edit Step Name
from the pop-up menu.
Steps can be renamed without affecting
operation.
Type "Initial Step", and press the Enter key.
The step will be renamed.
, a transition ,
2-5 Creating Steps and Transitions
2
2-13