Creating Sfc Elements; A-2-1 Simultaneous Sequence Divergences/Convergences - Omron SFC - INTRODUCTION GUIDE Introduction Manual

A-2 Creating SFC Elements
A-2

Creating SFC Elements

This section explains how to create more complex SFC elements, such as simultaneous sequence
divergences, simultaneous sequence convergences, divergences, and convergences.

A-2-1 Simultaneous Sequence Divergences/Convergences

This section explains how to add a simultaneous sequence divergence/convergence.
1 Create a simultaneous sequence
divergence.
Right-click a transition, and select Add
Simultaneous Sequence Divergence from
A
the pop-up menu.
A double-line representing a simultaneous
sequence divergence will be added. Two
diverted steps will also be added to the
divergence.
Right-click the double-line, and select Add
Simultaneous Divergent Step Branch from
the pop-up menu.
Another step will also be added to the
divergence.
Add transitions and steps to each of the
diverted steps.
Complete the diverted SFC chart.
A-4