Adding Steps/Transitions - Omron SFC - INTRODUCTION GUIDE Introduction Manual

2-5-2 Adding Steps/Transitions

Create the subsequent processes.
Add steps and transitions to the SFC chart.
1 Add a transition.
Right-click the Issue Ticket step, and select
Add Transition from the pop-up menu.
You can also add a transition by pressing the T
key while the step is selected.
A transition will be added.
2 Add a step.
Right-click the Trans1 transition, and select
Add Step from the pop-up menu.
You can also add a step by pressing the S key
while the transition is selected.
A step will be added.
2-5 Creating Steps and Transitions
2
2-15