Omron K3HB - MANUAL 2 Manual page 67

List of Settings
Communications Setting Level
Variable Address Parameter
type name
CA 0000 Communications
unit number
0001 Baud rate
0002 Communications
data length
0003 Communications
stop bits
0004 Communications
parity
0005 Send wait time
Note The values beginning with H' in the Monitor/Setting range column are used when setting or monitor-
ing data via communications.
Advanced Function Setting Level
Variable Address Parameter
type name
CB 0002 Output OFF delay
0003 Shot output
0004 Output logic
0009 Bank selection
Note (1) The values beginning with H' in the Monitor/Setting range column are used when setting or moni-
toring data via communications.
(2) If the event connector is provided as a standard feature or an event connector is added, use EV
for the "bank selection" setting.
2-22
Charac- Monitor/Setting range
ter
u-no H'00000000 to H'00000063: (0 to 99)
bps H'00000000: 9.6 (0), H'00000001: 19.2 (1),
H'00000002: 38.4 (2)
len H'00000000: 7 (0), H'00000001: 8 (1)
sbit H'00000000: 1 (0), H'00000001: 2 (1)
prty H'00000000: None (0), H'00000001: Even (1),
H'00000002: Odd (2)
sdwt
H'00000000 to H'00000063: (0 to 99)
Charac- Monitor/Setting range
ter
off-d
H'00000000 to H'000007CF: (0 to 1999)
shot
H'00000000 to H'000007CF: (0 to 1999)
out-n
H'00000000: Close in alarm (0),
H'00000001: Open in alarm (1)
bnk-c
H'00000000: OFF (0), H'00000001: KEY (1),
H'00000002: EV (2)
Character Default Decimal point
setting
0 to 99 1 ---
9. 6, 19. 2. 38. 4 9. 6 ---
7, 8 7 ---
1, 2 2 ---
none, even, odd even ---
0 to 99 20
---
Character Default Decimal point
setting
0 to 1999 0
---
0 to 1999 0
---
n-o, n-c n-o
---
off, key, ev off (See
---
note 2.)
Section 2
Unit
---
kbps
bit
bit
---
ms
Unit
ms
ms
---
---