10
Installing the VoIP Ceiling Speaker
Configure the Speaker Parameters
Parameter
Web Access Username
Web Access Password
Subnet Mask
Default Gateway
2.3.1 Log in to the Configuration Home Page
Note
CyberData Corporation
Table 2-3. Factory Default Settings (continued)
1. Open your browser to the speaker IP address.
For the initial configuration of the speaker, open your browser to the default IP address:
http://192.168.3.10
Make sure that the PC is on the same IP network as the speaker.
2. When prompted, use the following default Web Access Username and Web Access Password
to access the Home Page
Web Access Username: admin
Web Access Password: admin
SIP
Factory Default Setting
admin
admin
255.255.255.0
192.168.3.1
(Figure
2-6):
Figure 2-6. Home Page
930095H
Operations Guide
Need help?
Do you have a question about the VoIP Ceiling Speaker and is the answer not in the manual?
Questions and answers