Confirm That The Speaker Is Operational And Linked To The Network - CyberData VoIP Ceiling Speaker Operation Manual

2.2.2 Confirm that the Speaker is Operational and Linked to the Network

After connecting the speaker to the 802.3af compliant ethernet hub, the LEDs on the speaker face
confirm that the speaker is operational and linked to the network.
2.2.2.1 Status LED
After supplying power to the speaker:
1. The green Status LED illuminates after approximately five seconds to indicate the start of the
2. After approximately 15 seconds, the Status LED begins to blink at one second intervals to
3. After approximately 35 seconds, the speaker beeps once to indicate that it is operational.
4. The Status LED will continue to blink at one second intervals to indicate normal operation.
2.2.2.2 Link LED
●
●
Operations Guide
firmware verification and load process.
indicate the start of the firmware boot process.
The Link LED is illuminated when the network link to the speaker is established.
The Link LED blinks to indicate network traffic.
Figure 2-3. Status and Activity LEDs
930095H
Installing the VoIP Ceiling Speaker
Speaker Setup
Network
Link/Activity
(Yellow)
Speaker
Status
(Green)
CyberData Corporation
7