Table of Contents
Advertisement
24
Installing the VoIP Ceiling Speaker
Restore the Factory Default Settings
Parameter
Default Gateway
To restore these parameters to the factory default settings:
CyberData Corporation
Table 2-10. Factory Default Settings (continued)
1. Press and hold the RTFM switch for 20 seconds.
2. The speaker will beep after one second. Continue to hold the switch until the speaker beeps
again after 20 seconds.
3. Release the switch. The following occurs:
•
A voice message announces that the factory default settings are being restored.
•
Once the settings are restored, a voice message announces the restored default IP address:
192.168.3.10
•
A voice message announces that the speaker is rebooting.
•
The speaker reboots.
Factory Default Setting
192.168.3.1
930095H
Operations Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the VoIP Ceiling Speaker and is the answer not in the manual?
Questions and answers