Reboot The Speaker - CyberData VoIP Ceiling Speaker Operation Manual

22 Installing the VoIP Ceiling Speaker
Upgrade the Firmware and Reboot the Speaker
Web Page Item
Application
TFTP Server IP address
New Filename

2.5.1 Reboot the Speaker

To reboot a speaker, log in to the web page as instructed in
Home
CyberData Corporation
Table 2-9. Firmware Upgrade Parameters (continued)
Page".
1. Click Upgrade Firmware to open the Firmware Upgrade page
Description
Shows the current application filename for partition 1
and 2.
Enter the TFTP Server IP address.
Use this field to enter the new file name for the kernel or
application firmware file that you are uploading.
Click on this button to automatically upload the selected
firmware and reboot the system.
Link to the Speaker Setup page.
Link to the Network Setup page.
Link to go to the SIP Setup page.
Link to the MGROUPS Setup page.
Link to the Home page.
Click on this button to reboot the system.
930095H
Section 2.3.1, "Log in to the Configuration
(Figure 2-12).
Operations Guide