Unit Specifications - Omron CQM1H - 08-2005 Operation Manual

Programmable controllers; inner boards
Hide thumbs Also See for CQM1H - 08-2005:
Table of Contents

Advertisement

Unit Specifications

2-1
Unit Specifications
2-1-1
Power Supply Units
Item
Supply voltage
Allowable voltage range
Operating frequency
range
Power consumption
Inrush current
Output capacity
Insulation resistance
Dielectric strength
Noise immunity
Vibration resistance
Shock resistance
Ambient temperature
Humidity
Atmosphere
Grounding
Enclosure rating
Weight
Dimensions
(without cables)
44
CQM1-PA203
100 to 240 V AC, 50/60 Hz
85 to 264 V AC
47 to 63 Hz
60 VA max.
120 VA max.
30 A max.
5 V DC: 3.6 A (18 W) 5 V DC: 6 A
24 V DC: 0.5 A
(30 W total) 24 V DC output accuracy: +10%,
−15%
20 MΩ min. (at 500 V DC) between AC external terminals and GR
terminals (see note 1)
2,300 V AC 50/60 Hz for 1 min between AC external and GR terminals, (see note 1)
leakage current: 10 mA max.
1,000 V AC 50/60 Hz for 1 min between DC external and GR terminals, (see note 1)
leakage current: 20 mA max.
Conforms to IEC61000-4-4; 2 kV (power lines)
10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s
and Z directions for 80 minutes each (Time coefficient of 8 minutes × coefficient factor of 10
= total time of 80 minutes)
2
2
147 m/s
(118 m/s
for Contact Output Units) 3 times each in X, Y, and Z directions
Operating: 0 to 55 °C
Storage: –20 to 75 °C (except battery)
10% to 90% (with no condensation)
Must be free from corrosive gases
Less than 100 Ω
Mounted in a panel
5 kg max.
187 to 603 × 110 × 107 mm (W×H×D)
Note
1. Disconnect the LG terminal of the Power Supply Unit from the GR terminal
when performing insulation and dielectric strength tests. If the tests are re-
peatedly performed with the LG and GR terminals short-circuited, the in-
ternal components may be damaged.
2.
Acceleration (m/s
CQM1-PA206
CQM1-PA216
100 or 230 V AC
(selectable), 50/60 Hz
85 to 132 V AC or 170
to 264 V AC
9.8
2
)
Amplitude (0.075)
Section 2-1
CQM1-PD026
24 V DC
20 to 28 V DC
---
50 W max.
5 V DC: 6 A (30 W)
20 MΩ min. (at 500 V
DC) between AC
external terminals and
GR terminals (see
note 1)
2
(see note 2) in X, Y,
Frequency (Hz)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents