Writing Master Parameters; Creating/Editing Slave Parameters; Writing The Parameters To A Master Unit - Omron 3G8F5-DRM21 Operation Manual

Writing Master Parameters

3-6-6 Creating/Editing Slave Parameters

3-7

Writing Master Parameters

3-7-1 Writing the Parameters to a Master Unit

Master Parameters Created Offline
1, 2, 3...
74
• Select the desired Master in the device list window, select "Edit" from the menu
bar, and select "Edit Device Parameters."
• Select the desired Master in the device list window, click the right button on the
mouse, and select "Edit Device Parameters" from the popup menu.
Device parameters can also be created and edited for some Slaves made by
other companies. Use the same operations described in 3-6-5 Editing Master
Parameters to edit these Slave parameters.
After creating the Master parameters file offline, switch to online operation, and
write the Master parameters file to a Master Unit in the network. The procedure is
described below.
1. Switch to online operation.
2. Use one of the following operations to bring up the "Edit Device Parameters"
window from the device list window.
• Double-click on the desired Master in the device list window.
• Select the desired Master in the device list window, select "Edit" from the
menu bar, and select "Edit Device Parameters."
• Select the desired Master in the device list window, click the right button on
the mouse, and select "Edit Device Parameters" from the popup menu.
The following window will be displayed.
3. Click on "Write from File." A window will be displayed to select the Master
parameters file.
4. Specify the desired Master parameters file. The data will be read from the
Master parameters file and the Master parameters will be set for the Master
Unit that is being edited.
5. A confirmation window will be displayed when you click on "Write to Device."
Click on "Yes" to start writing the Master parameters.
Section 3-7