Using the Automatic Clock Adjustment Function
12-2-2 Settings Required for Automatic Clock Adjustment Function
Note
326
The following settings must be set in the Unit Setup when using the automatic
clock adjustment function.
CX-
Settings
Programmer
tab
Auto Adjust
Server specification
Time
type
IP Address
Host name
Port No.
Get the time informa-
tion from the SNTP
server
Auto Adjust Time
Retry timer
Adjust Time
DNS (See
IP Address
note.)
Port No.
Retry timer
When the Server specification type field in Auto Adjust Time Tab is set to Host
name.
Setting conditions
Required.
12-2-3 Auto Adjust
Time on page 327
One or the other is
required, depending
on the Server specifi-
cation type setting.
Rarely required.
(Change when a set-
ting other than the
default setting of 123
is required.)
Required.
Optional
Optional (Change
when the default set-
ting of 10 seconds is
unacceptable.)
Optional
Required.
3-8 TCP/IP and Link
Settings on page 52
Rarely required.
(Change when a set-
ting other than the
default setting of 53
is required.)
Optional (Change
when the default set-
ting of 10 seconds is
unacceptable.)
Section 12-2
Reference