Omron CJ1W-EIP21 - 10-2010 Operation Manual page 421

FINS Commands Addressed to EtherNet/IP Units or Built-in EtherNet/IP Ports
Mode Setting (Response)
The mode setting in the system setup is returned.
15 14 13 12 11
Broadcast Address Setting
Bit 1
0 Broadcast with host number set to all ones (4.3BSD specifications)
1 Broadcast with host number set to all zeroes (4.2BSD specifications)
Communications Partner IP Address Conversion Method Setting
Bit 3 Bit 2
0 0 Automatic generation method (dynamic)
0 1 Automatic generation method (static)
1 0 IP address table reference method
1 1 Combined method (IP address table reference + automatic generation
(dynamic))
FINS/UDP Port Number Setting
Bit 4
0 Default (9600)
1 Unit Setup value
FINS/TCP Port Number Setting
Bit 5
0 Default (9600)
1 Unit Setup value
Baud Rate Setting
Bit 8
0 Automatic detection
1 Fixed
SNTP Server Specification Method
Bit 9
0 IP address
1 Host name
Ethernet Address (Response)
The Ethernet address of the EtherNet/IP Unit or built-in EtherNet/IP port is returned.
Note This Ethernet address is listed on the label on the side of the EtherNet/IP Unit or (for a built-in EtherNet/
IP port), on the CPU Unit.
10 9 8 7 6 5 4 3
Meaning
Meaning
Meaning
Meaning
Meaning
Meaning
2 1 0
Bit 1: Broadcast setting
Bits 2 and 3: IP address conversion method
Bit 4: UDP port number setting for FINS
Bit 5: TCP port number setting for FINS/TCP
Bit 8: Transmission speed (baud rate)
Bit 9: SNTP server specification method
Appendix E
393