Omron CJ1W-EIP21 - 10-2010 Operation Manual page 417

CIP Message Communications
Example of Additional Status in case that General Status Is 01 Hex.
(Status of Connection Manager Object)
General Status Additional
(hex) Status (hex)
01 0100
01 0103
01 0106
01 0107
01 0108
01 0109
01 0110
01 0111
01 0113
01 0114
01 0115
01 0116
01 0117
01 0118
01 0119
01 011A
01 011B
01 0203
01 0204
01 0205
01 0206
01 0207
01 0301
01 0302
01 0303
01 0304
01 0311
01 0312
01 0315
01 0316
01 0317
01 0318
01 0319
01 031A
01 031B
01 031C
01 031D
01 031F
01 0320-07FF
Connection in Use or Duplicate Forward Open.
Transport Class and Trigger combination not supported
Ownership Conflict
Connection not found at target application.
Invalid Connection Type. Indicates a problem with either the Connection Type or Prior-
ity of the Connection.
Invalid Connection Size
Device not configured
RPI not supported. May also indicate problem with connection time-out multiplier, or
production inhibit time.
Connection Manager cannot support any more connections
Either the Vendor Id or the Product Code in the key segment did not match the device
Product Type in the key segment did not match the device
Major or Minor Revision information in the key segment did not match the device
Invalid Connection Point
Invalid Configuration Format
Connection request fails since there is no controlling connection currently open.
Target Application cannot support any more connections
RPI is smaller than the Production Inhibit Time.
Connection cannot be closed since the connection has timed out
Unconnected Send timed out waiting for a response.
Parameter Error in Unconnected Send Service
Message too large for Unconnected message service
Unconnected acknowledge without reply
No buffer memory available
Network Bandwidth not available for data
No Tag filters available
Not Configured to send real-time data
Port specified in Port Segment Not Available
Link Address specified in Port Segment Not Available
Invalid Segment Type or Segment Value in Path
Path and Connection not equal in close
Either Segment not present or Encoded Value in Network Segment is invalid.
Link Address to Self Invalid
Resources on Secondary Unavailable
Connection already established
Direct connection already established
Miscellaneous
Redundant connection mismatch
No connection resources exist for target path
Vendor specific
Explanation
Appendix D
389