Omron CJ1W-EIP21 - 10-2010 Operation Manual page 425

FINS Commands Addressed to EtherNet/IP Units or Built-in EtherNet/IP Ports
Response Codes
Response code
0000 Normal end
1001 Command too large
1002 Command too small (No test data)
BROADCAST TEST RESULTS READ
Reads the results (number of times data received) of the broadcast test.
Command Block
08 02
Command
code
Response Block
08 02
Command Response
code code received
Parameters
Times Received (Response)
The number of times the data has been received normally during the broadcast send test is returned as a
hexadecimal number. The number of times received is cleared each time the result is read.
Response Codes
Response code
0000 Normal end
1001 Command too large
BROADCAST DATA SEND
Sends test data simultaneously to all nodes on the network.
Command Block
08 03 1,460 bytes max.
Command
code
Parameters
Test Data (Command)
This command specifies the data to be sent to the specified nodes. Up to 1,460 bytes can be specified.
Description
Times
Description
Test data
Appendix E
397