Warnings And Legal Information; Legal Information And Responsibility; Electrostatic Discharge Awareness; Safety Issues - THOMSON MEC 310#GENSET CONTROLLER OPTION J-CANBUS J1939 Manual

MEC 310 GENSET CONTROLLER - Option J – CANbus J1939
Thomson Technology takes no responsibility for installation or operation of the engine set. If there is
any doubt about how to install or operate the engine controlled by the unit, the company responsible
for the installation or the operation of the set must be contacted.
The units are not to be opened by unauthorized personnel. If opened anyway, the
Sufficient care must be taken to protect the terminals against static discharges during the
installation. Once the unit is installed and connected, these precautions are no longer necessary.
Installing the unit implies work with dangerous currents and voltages. Therefore, the installation should
only be carried out by authorised personnel who understand the risks involved in working with live
electrical equipment.
Be aware of the hazardous live currents and voltages. Do not touch any AC
measurement inputs as this could lead to injury or death.
The unit is delivered with certain factory settings. Given the fact that these settings are based on
average values, they are not necessarily the correct settings for matching the individual engine.
Thus precautions must be taken to check the settings before running the engine.
Throughout this document a number of notes and warnings will be presented. To ensure that these
are noticed, they will be highlighted in order to separate them from the general text.
Notes
The notes provide general information, which will be helpful for the reader to
bear in mind.
Warning
The warnings indicate a potentially dangerous situation, which could result in
death, personal injury or damaged equipment, if certain guidelines are not
followed.
PM077 R1 09/08/20

1. Warnings and legal information

Legal information and responsibility

warranty will be lost.

Electrostatic discharge awareness

Safety issues

Factory settings

Definitions

Page 1 THOMSON TECHNOLOGY