Table of Contents
Advertisement
INSTRUMENTS
38
Trip Meter
Do not attempt to switch between the
odometer
and
modes or reset the trip meter while
the motorcycle is in motion.
Stop
the
between the odometer and trip meter
display modes or reset the trip meter.
Failure to follow the advice above may
lead to loss of motorcycle control
which could result in serious injury or
death.
There are two trip meters. Either trip
meter shows the distance that the
motorcycle has travelled since the
meter on display was last reset to zero.
1. Trip meter display (TRIP 1 shown)
WARNING
trip
meter
display
motorcycle
to
switch
1
To switch between trip meters, push
and release the SCROLL/SELECT button,
located on the left handlebar switch,
until the required trip meter is shown.
1
cldn_1
1. SCROLL/SELECT button
Scrambler 400 X Only
The trip meters are not accessible when
in off-road mode. The trip meter data
continues to be collected when riding in
off-road mode. The updated trip meter
data is shown in the trip meters after
switching the off-road mode off.
Trip Meter Reset
To reset either of the trip meters:
▼ Select the trip meter to be zeroed.
▼ Push and hold the SCROLL/SELECT
button for one second. After more
than one second, the trip meter on
display will reset to zero.
Advertisement
Chapters
Table of Contents
