Seat - Removal - Triumph Speed 400 2023 Owner's Handbook Manual

Seat - Removal

WARNING
Make sure the motorcycle is stabilised
and adequately supported.
Do not support the motorcycle on any
ancillary component,
system or any other non structural
parts of the motorcycle frame.
A correctly supported motorcycle will
help prevent it from falling.
An unstable motorcycle
resulting in motorcycle
serious injury or death.
NOTICE
To prevent damage to the seats or
seat covers, care must be taken not to
drop the seats.
Do not lean the seats against the
motorcycle or any surface which may
damage the seats or seat covers.
Instead, place the seats, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seats
which may cause damage or staining
to the seat covers.
GENERAL INFORMATION
Speed 400
Seat
▼ Insert the ignition key into the seat
▼ Turn the ignition key clockwise while
the exhaust
▼ Lift the seat up from the back and
may fall
damage,
1. Seat lock
2. Seat
lock.
pressing down on the rear of the
seat. This will release the seat from
its lock.
slide rearwards for complete removal
from the motorcycle.
2
cleq
1
59