Considerations For High Speed Operation - Triumph Speed 400 2023 Owner's Handbook Manual

Considerations for High
Speed Operation
WARNING
This motorcycle should be operated
within the legal speed limits for the
particular road travelled.
Riding a motorcycle at high speeds
can be dangerous since the time
available to react to a hazard is
greatly reduced at high speeds.
Always reduce speed in potentially
hazardous driving conditions such as
bad weather or heavy traffic.
Failure to follow the advice above may
lead to loss of motorcycle control
which could result in serious injury or
death.
WARNING
Only operate this motorcycle at high
speed in closed-course,
competition or
racetracks.
High speed operation should only then
be attempted by riders who have been
instructed in
necessary for high speed riding and
are familiar with the motorcycle's
characteristics in all conditions.
High speed operation in any other
circumstances is dangerous and may
lead to loss of motorcycle control
which could result in serious injury or
death.
HOW TO RIDE THE MOTORCYCLE
on-road
on closed-course
the techniques
WARNING
The handling characteristics of a
motorcycle at high speed may vary
from those you are familiar with at
legal road speeds.
Do not attempt high speed operation
unless you have received sufficient
training and have the required skills.
Failure to follow the advice above may
lead to loss of motorcycle control
which could result in serious injury or
death.
WARNING
The items listed below are extremely
important and
neglected.
A problem, which may not be noticed
at normal operating speeds, may be
greatly exaggerated at high speeds.
Check the items listed below before
any high speed operation.
Failure to follow the advice above may
lead to loss of motorcycle control
which could result in serious injury or
death.
General
Make sure that the motorcycle has been
maintained according to the scheduled
maintenance chart.
Brakes
Check that the front and rear brakes
are functioning correctly.
Coolant
Check that the coolant level is at the
upper level line in the expansion tank.
Always check the level with the engine
cold.
must never be
79