Table of Contents
Advertisement
WARNING
Do not install tube type tyres on
tubeless rims. The bead will not seat
and the tyres could slip on the rims,
causing rapid tyre deflation.
Never install an inner tube inside a
tubeless tyre without the appropriate
marking. This will cause friction inside
the tyre and the resulting heat build-
up may cause the tube to burst
resulting in rapid tyre deflation.
Failure to follow the advice above may
lead to loss of motorcycle control
which could result in serious injury or
death.
Typical Tyre Marking - Tubeless Tyre
chrt
Typical Wheel Marking - Tubeless Tyre
MAINTENANCE AND ADJUSTMENT
Tyre Inflation Pressures
Incorrect tyre inflation will cause
abnormal tread wear and instability
problems.
Under inflation may result in the tyre
slipping on, or coming off the rim.
Overinflation will cause instability and
accelerated tread wear.
Both conditions are dangerous as they
may lead to loss of motorcycle control
which could result in serious injury or
death.
Tyre
reduced for off-road riding will impair
on-road stability.
Always make sure that the tyre
pressures are set as described in the
Specification section for on-road use.
Operation of the motorcycle with
incorrect tyre pressures may lead to
loss of motorcycle control which could
result in serious injury or death.
Correct inflation pressure will provide
maximum stability, rider comfort and
tyre life. Always check tyre pressures
before riding when the tyres are cold.
Check tyre pressures daily and adjust if
necessary. See the Specification section
for details of the correct inflation
pressures.
WARNING
WARNING
pressures
which
131
have
been
Advertisement
Chapters
Table of Contents
