Rear Brake Fluid Level Inspection And Adjustment - Triumph Speed 400 2023 Owner's Handbook Manual

MAINTENANCE AND ADJUSTMENT
120
Rear Brake Fluid Level Inspection
and Adjustment
Make sure the motorcycle is stabilised
and adequately supported.
Do not support the motorcycle on any
ancillary component,
system or any other non structural
parts of the motorcycle frame.
A correctly supported motorcycle will
help prevent it from falling.
An unstable
resulting
serious injury or death.
If there has been an appreciable drop
in the level of the fluid in either fluid
reservoir the brake system must be
inspected.
If the brake lever or pedal feels soft
when it is applied, or if the lever/pedal
travel becomes excessive, there may
be air in the brake lines or the brake
may be defective.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and will
performance
Contact a competent person with the
specialist knowledge and technical
understanding of motorcycles, such as
an authorised
inspect and, if necessary, repair the
brake system.
Failure to follow the advice above may
lead to loss of motorcycle control
which could result in serious injury or
death.
WARNING
the
motorcycle may
in motorcycle damage,
WARNING
cause reduced
Triumph dealer
To prevent paint damage, do not spill
brake fluid onto any area of the
bodywork.
Spilled
paintwork.
The reservoir is visible from the right
exhaust
hand side of the motorcycle, forward of
the silencer and below the seat.
To inspect the rear brake fluid level:
▼ Check the level of brake fluid visible
in the reservoir.
fall
▼ The brake fluid level must be kept
between the MAX and MIN marks
(reservoir held horizontal).
clfx_1
1. Reservoir
brake
2. MAX mark
3. MIN mark
to
NOTICE
brake fluid will
1
damage
2
3