Rear Light - Triumph Speed 400 2023 Owner's Handbook Manual

Headlight Adjustment
NOTICE
Check and correct the tyre pressures
prior to adjusting the headlight.
▼ Make sure the handlebars are in the
straight ahead position.
▼ Switch the headlight dipped beam on.
▼ Loosen the
fixings sufficiently to allow restricted
movement of the headlight.
▼ Adjust the position of the headlight
to give the required beam setting.
▼ Tighten the
fixings to 9 Nm.
cldm_1
1. Headlight mounting fixing
(Scrambler 400 X shown)
▼ Recheck the headlight beam setting.
Rectify as required.
MAINTENANCE AND ADJUSTMENT
headlight mounting
headlight mounting
1
Headlight Replacement
The headlight unit
maintenance-free
headlight unit must be replaced in the
event of the failure of the headlight.
Daytime Running Light (DRL) (if
fitted)
The Daytime Running Light (DRL) is
situated within the headlight assembly
and is a sealed, maintenance-free LED
unit. The headlight
replaced in the event of the failure of
the DRL.
Position Light
The position light unit is a sealed,
maintenance-free LED unit.

Rear Light

The rear light
maintenance-free LED unit. The rear
light unit must be replaced in the event
of the failure of the rear light.
is a sealed,
LED unit. The
unit must be
unit is a sealed,
147