Wheel Bearings Inspection - Triumph Speed 400 2023 Owner's Handbook Manual

NOTICE
Always inspect the wheel bearings at
the same time
bearings.
Inspecting the Steering for Free Play
▼ Position the motorcycle on level
ground, in an upright position.
▼ Place the motorcycle on a suitable
stand with the front wheel off the
ground and secure the motorcycle.
▼ Standing at
motorcycle, hold the lower end of the
front forks and try to move them
forward and backward.
▼ If any free play can be detected in
the steering (headstock) bearings,
the steering
inspected and
competent person with the specialist
knowledge
understanding of motorcycles, such
as an authorised Triumph dealer.
▼ Remove the support and place the
motorcycle on the side stand.
MAINTENANCE AND ADJUSTMENT
as the steering
the front of the
bearings must
adjusted by
and technical

Wheel Bearings Inspection

Make sure the motorcycle is stabilised
and adequately supported.
Do not support the motorcycle on any
ancillary component,
system or any other non structural
parts of the motorcycle frame.
A correctly supported motorcycle will
help prevent it from falling.
An unstable
resulting in
serious injury or death.
Never neglect
maintenance.
bearings in accordance with scheduled
maintenance requirements and make
adjustments or replace as necessary.
Scheduled
carried out by a competent person
with the specialist knowledge and
technical
motorcycles, such as an authorised
Triumph dealer.
Riding the motorcycle with worn or
be damaged wheel bearings is dangerous
a and may lead to loss of motorcycle
control which could result in serious
injury or death.
WARNING
the exhaust
motorcycle may
motorcycle damage,
WARNING
wheel bearings
Check the
maintenance must
understanding
125
fall
wheel
be
of