Moving Off - Triumph Speed 400 2023 Owner's Handbook Manual

HOW TO RIDE THE MOTORCYCLE
72
▼ Check that the engine stop switch is
in the RUN position.
▼ Make sure the transmission is in
neutral.
▼ Turn the ignition switch on.
When the ignition is switched on, the
instrument
illuminate and will then go off (except
those which normally remain on until
the engine starts, see page 27).
▼ Pull the clutch lever fully into the
handlebar.
▼ Leaving the throttle fully closed,
push the START button until the
engine starts.
▼ The motorcycle is equipped with
starter
switches prevent the electric starter
from operating
transmission is not in neutral with
the side stand down.
▼ If the side stand is extended whilst
the engine is running, and the
transmission is not in neutral then
the engine will stop regardless of the
clutch lever position.
NOTICE
warning lights
lockout switches.
when

Moving Off

▼ Pull in the clutch lever and select
first gear.
▼ Open the throttle a little and let out
the clutch lever slowly.
▼ As the clutch starts to engage, open
the throttle a little more, allowing
enough
will
stalling.
The
the
engine speed to avoid