Table of Contents
Advertisement
MAINTENANCE AND ADJUSTMENT
124
Steering/Wheel Bearings
To prevent risk of injury from the
motorcycle
inspection,
motorcycle is stabilised and secured
on a suitable support.
When inspecting steering and wheel
bearings, do not exert extreme force
against each wheel or rock each wheel
vigorously as this may cause the
motorcycle to become unstable and
fall from its support.
Failure to follow the advice above
could result in motorcycle damage,
serious injury or death.
WARNING
falling
during
make
sure
that
Steering Bearings Inspection
Make sure the motorcycle is stabilised
and adequately supported.
the
the
Do not support the motorcycle on any
ancillary
system or any other non structural
parts of the motorcycle frame.
A correctly supported motorcycle will
help prevent it from falling.
An
unstable
resulting
serious injury or death.
Never neglect steering (headstock)
bearings
steering bearings in accordance with
scheduled maintenance requirements
and make adjustments or replace as
necessary.
Scheduled
carried out by a competent person
with the specialist knowledge and
technical
motorcycles, such as an authorised
Triumph dealer.
Riding the motorcycle with incorrectly
adjusted
bearings is dangerous and may lead to
loss of motorcycle control which could
result in serious injury or death.
The steering (headstock) bearings must
be
lubricated
accordance
maintenance requirements.
WARNING
component,
the
motorcycle
may
in
motorcycle
WARNING
maintenance.
Check
maintenance
must
understanding
or
defective
and
inspected
with
scheduled
exhaust
fall
damage,
the
be
of
steering
in
Advertisement
Chapters
Table of Contents
