ADTRAN NetVanta 1570 Series Configuration Manual page 17

SNMP in the NetVanta 1570
Table 5. SNMP v3 Configuration Command Summary (Continued)
Step Command
(config)#snmp-server user
<username> engine-id <id>
[md5|sha] <password> priv
[aes|des]<password>
Step 4 Configure a SNMP Group
(config)#snmp-server
security-to-group model
[v1|v2c|v3] name <username> group
<security groupname>
Step 5 Configure SNMP Views
(config)#snmp-server view <name>
<OID> [exclude|include]
Step 6 Configure Access to SNMP Information
(config)snmp-server access
<security groupname> model
[any|v1|v2c|v3] level [auth|no
auth|priv] [read <name>] [write
<name>]
Step 7 Configure Community and Source IP Addresses
(config)#snmp-server community
<community name> ip-range [<ipv4
address> <subnet mask> |ipv6-range
<ipv6 address>]
Table 6. Optional Settings for SNMP v1/v2 and v3
Engine ID
Server
Contact
Information
(config)#snmp-server chassis-id
Chassis ID
<string>
6AMCCG0018-29A
(config)#snmp-server engine-id
local <id>
(config)#snmp-server contact
[<string>|email <string>|phone
<string>]
Explanation
Add a user to the SNMP system and option-
ally associate a security level to the user and
configure the security keys.
Assign the user created in Step 3 above to a
group. A users's access to SNMP informa-
tion is determined by group membership.
Create or modify a SNMP view entry for
monitoring SNMP network objects.
Configure the SNMP security model, access
level, and optional SNMP views for the
secuirty group that was created in Step 4
above.
Configure the community and source IP
v4/v6 addresses.
Optional. Set the SNMP Engine ID. By
default the local SNMP server engine ID is
8000029803xxxxxxxxxxxx (where the
string of Xs represents the system's MAC
address) Adtran recommends using the
default engine ID.
Optional. Configures the server contact infor-
mation for the ASE device.
Optional. Configures a chassis ID for the
ASE device.
Command Summary
17