Reducing Fire Risk; Preventing Oven Damage; Grounding Instructions; Power Cord Replacement - TurboChef 2020 Owner's Manual

Hide thumbs Also See for 2020:
Table of Contents

Advertisement

ii
SAfeTy INfOrMATION

reducing fire risk

If materials inside the oven ignite or if smoke is observed,
1. Turn off the oven.
2. Disconnect the power cord or shut off power at the fuse/circuit breaker panel.
Carefully attend the oven if paper, plastic, or other combustible materials are placed inside the oven
o
to facilitate cooking.
DO NOT leave items in the cook cavity when the oven is not in use.
DO NOT cook items wrapped in cling wrap or plastic film.
DO NOT overcook food.

Preventing Oven Damage

When servicing this appliance, do not tear insulation to get to components. Rather, find the edge of
o
the insulation and remove the tape that holds it in place.
Clean the oven daily.
o
Clean the oven only with TurboChef Oven Cleaner.
o
DO NOT clean with a water jet.
DO NOT allow cleaning solution or water to remain in the cook cavity longer than necessary.

Grounding Instructions

WARNING: Improper grounding increases the risk of electric shock.
This appliance must be grounded. The cord is equipped with a grounding wire and plug, which in the
event of an electrical short circuit, reduce the risk of electric shock by providing an escape wire for the
electric current. The wire must be plugged into an outlet that is properly installed and grounded.
Consult a qualified electrician or serviceman to determine whether or not the appliance is properly
grounded.
DO NOT use an extension cord. If the power supply cord is too short, request a qualified electrician
or serviceman to install an outlet near the appliance.

Power Cord replacement

To avoid potential hazards, only the manufacturer, its service agent, or a similarly-qualified person
should replace a damaged power cord.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2620

Table of Contents