Oven Construction; Electrical Specifications; Installation; Unpacking Instructions - TurboChef Eco Service Manual

2 SPECIFICATIONS AND INSTALLATION

Oven Construction

Exterior
• 430 stainless steel outer wrap and door
• Cool-to-touch exterior; all surfaces below 50°C
• Ergonomic door handle
Interior
• 201/304 stainless steel
• Fully welded and insulated cook chamber
• Removable rack and lower jetplate for cleaning

Electrical Specifications

TurboChef recommends a Type D circuit breaker
for all installations outside the United States.
US/Canada
208/240 VAC, 60 Hz, 20 Amps,
• Max Input: 3.6 kW
• Microwave: 2 kW
• Heaters/Blowers: 4.0 kW**
AK - International
240 VAC*, 50 Hz, 19 A
• Max Input: 3.5 kW
• Microwave: 2.0 kW
• Heaters/Blowers 4.0 kW**
BK - International
220 VAC, 60 Hz, 20 A
• Max Input: 3.6 kW
• Microwave: 2.0 kW
• Heaters/Blowers 4.0 kW**
EU - International
230 VAC, 50 Hz, 16 A
• Max Input: 3.3 kW
• Microwave: 2.0 kW
• Heaters/Blowers 3.7 kW**
* US/Canada models include a voltage sensor that detects 208 or 240 VAC, but does not compensate for lack-of or over-voltage
installations.
** Under normal operation, the oven will not exceed the max input value.
LA - International
220 VAC, 60 Hz, 20 A
• Max Input 3.6 kW
• Microwave: 2.0 kW
• Heaters/Blowers: 4.0 kW**
UK - International
230 VAC, 50 Hz, 13 A
• Max Input: 2.6 kW
• Microwave: 2.0 kW
• Heaters/Blowers: 2.9 kW**
JK - International (Japan)
200 VAC, 50 or 60 Hz, 20 A
• Max Input: 3.5 kW
• Microwave: 2.0 kW
• Heaters/Blowers: 4.0 kW**
SK - International
230 VAC, 60 Hz, 16 A
• Max Input: 3.3 kW
• Microwave: 2.0 kW
• Heaters/Blowers: 3.7 kW**
KA - International
230 VAC, 60 Hz, 16 A
• Max Input: 3.3 kW
• Microwave: 2.0 kW
• Heaters/Blowers: 3.7 kW**

Installation

Install or locate this appliance only in accordance
with the instructions below.

Unpacking Instructions

1. Remove the oven from its packaging.
2. Before discarding, check the packaging
thoroughly for accessories and literature.
NOTE: Packaging may also be retained in case the
oven may at some point be shipped somewhere else
or returned to the manufacturer.
3. Check the cook cavity thoroughly for
accessories and literature.
4. Discard any packaging in the cook cavity.