Table of Contents
Advertisement
7 - E-kit user interface
User level
Usage session
Access to the web interface
Homepage
18 | © 2022 ABB | - 1SDH002203A1002
There are two user levels:
•
Guest
•
Admin
Guest user is the user with which E-kit is initially accessed. A password is not required and only the individual
devices can be viewed.
The default password of Admin user is "Admin". It enables you to configure the system, add new devices,
configure models and display them.
The Admin user password can be changed via web interface.
IMPORTANT: to ensure secure use, you are strongly advised to choose a new password the first
time E-kit is used.
Several sessions of E-kit can be active at the same time. This means that up to 15 browser tabs can be
opened, but all with the same user level.
For example, if the open session is in the Admin user mode, then a simultaneous session cannot be opened
in the Guest user mode, and vice versa.
To access the E-kit integrated web server, open the browser (tested on Google Chrome web browser) and
type the IP address set during the configuration process into the address bar (see Setting of static IP address
(recommended)).
The following page appears in the browser screen
The footer on the left provides the option to restart E-kit using button
the settings of the devices using button
The save button turns red if there are changes that have not been saved
if the session is closed without saving.
The software version and E-kit status are displayed in the status bar on the right. The dot alongside the
version flashes alternately in the grey and yellow colors in the absence of faults, otherwise it remains fixed
on the same color.
The current user is displayed in the right header. Click on the Login button to change the user.
The area on the left displays the menu and enables the devices to be viewed in the list at center screen while
the focus, i.e. the detail of the device selected in the list, is shown in the right-hand part of the page.
The button
at the bottom of the menu allows the Admin user to access the database for model
management.
/
(function only available for Admin users).
ABB | E-kit
and to save any changes made to
. The new changes will be lost
E-kit user interface
Advertisement
Table of Contents
