Licence Management; Function; Opening Licence Management (Licensemanager); Installing A Licence - Fronius Virtual Welding 2.0 MobileCase Operating Instructions Manual

Licence management

Function

System-relevant information, such as the following, are shown in the Licensemanager ar-
ea:
-
-
-
Additional Virtual Welding licences, such as licences to enable additional welding process-
es, can also be installed here.
Opening licence
1
management (Li-
censemanager)
2
3
4
Installing a li- Once a new licence has been purchased, it will be sent to the customer by the specialist
cence dealer.
1
2
3
4
Hardware dongle serial number
Installed licences
etc.
Touch the NFC key on the Virtual Welding system sensor to open terminal manage-
ment
- For the sensor location, see section
(1)
Select button (1)
Select tab (2)
Select button (3)
Licence information is displayed
-
Save the new licence to a USB flash drive
Connect the USB flash drive to the USB port of the Virtual Welding system
Open Licensemanager (see previous section)
Confirm the message displayed
This will install and activate the new licence
-
Touchscreen and sensor
(2)
23
on page
(3)
97