License Management; Function; Opening License Management; Installing A License - Fronius Virtual Welding 2.0 Operating Instructions Manual

License management

Function

System-relevant information is displayed in license management, such as:
-
-
-
Additional Virtual Welding licenses can also be installed in license management, for exam-
ple to enable additional welding processes.
Opening license
1
management
2
3
4
Installing a li-
Once a new license has been purchased, it will be sent to the customer by the specialist
cense dealer.
1
2
3
4
Hardware-Dongle serial number
Installed licenses
etc.
With the NFC key, touch the sensor on the Virtual Welding system to open terminal
management
For the position of the sensor, see section
-
(1)
Select button (1)
Select tab (2)
Select button (3)
- License information is displayed
Save the new license to a USB thumb drive
Connect the USB thumb drive to the USB port of the Virtual Welding system
Open license management (see previous section)
Confirm the displayed message
This will install and activate the new license
-
Touch screen and sensor
(2)
on page 23
(3)
97