Program Menu - Eaton easyE4 Manual

4. Operation
4.4 Overview of the menus on the device

4.4.8 Program menu

168
This menu will only be available if the easyE4 is configured with its fact-
ory settings and/or when a program created with the EDP programming
language has been stored on the easyE4 device.
You can use this menu to create a program with the EDP programming language dir-
ectly on the easyE4 device.
Tab. 56: Main menu
STOP ✓ RUN
PARAMETERS
SET CLOCK
CARD
INFORMATION
SYSTEM OPTIONS
PROGRAM
Pressing the OK button will show the parameters for
the individual function blocks in an additional sub-
menu that can be used to modify these parameters
with the device's cursor buttons.
easyE4 02/24 MN050009EN Eaton.com
Opens another menu
Tab. 57: Programs
CIRCUIT DIAGRAM
FUNCTION BLOCKS
Used to display and edit the
active circuit diagram, e.g.,
Tab. 58: Programs\Function
Blocks
T 01 Ü S +
C 02
L:1 STOP
Tab. 59: Timer module
example
T 01 Ü S +
>I1 000 800
>I2 009 200
QV> 000 000
..