Safety Regulations; Basics; Mandatory Requirements, Personnel Requirements; Occupational Safety - Eaton easyE4 Manual

Hide thumbs Also See for easyE4:

Table of Contents

1. Description of easyE4 control relay

1.9 Safety regulations

The device has been designed according to the state of the art and all generally

accepted safety rules and standards. However, this alone cannot eliminate all poten-

tial hazards, which is why it is necessary for you to be aware of all hazards and resid-

Do not run the device unless it is in perfect technical condition. Make sure to always

operate it as specified in this document and for the intended purpose.

Follow the safety instructions for the easyE4!

The section on safety instructions must be read and understood by

everyone who will be working with the easyE4 before the actual work

is performed.

Pay attention to the hazard severity levels used throughout this doc-

umentation whenever a hazard is indicated. The hazard symbol and

signal word used and the corresponding text will provide information

regarding the specific hazard and how to avoid or prevent it.

All generally accepted occupational health and safety rules and standards (internal

and national) must be complied with, as must be all applicable laws and regulations

in the relevant country.

The personnel responsible for installation, operation, maintenance, and repairs must

have the necessary qualifications for the work they will be performing. They must be

appropriately trained and/or briefed and be informed of all hazards and risks asso-

ciated with the device.

easyE4 02/24 MN050009EN Eaton.com

Table of Contents