Operation; Base Device With Display And Buttons; Lcd Display - Eaton easyE4 Manual

Hide thumbs Also See for easyE4:

Table of Contents

4. Operation

The way in which the various base devices are operated varies.

Only EASY-E4-...-12...C1(P) base devices with a display and buttons can be operated

Meanwhile, EASY-E4-...-12...CX1(P) base devices with LED indicators used for dia-

gnostic purposes, as well as all expansion devices, are limited to providing inform-

ation via their LEDs' flashing patterns.

→ Section "Startup behavior of easyE4 control relay with LED indicators", page 106

Fig. 78: Display and keypad

Monochrome device display with six lines, each with 16 characters (128 x 96 pixels).

Fig. 79: Example of status display on display

The display can show texts, values, parameters, and pseudographics.

Once the device is switched on, as well as during ongoing operation, the device will

switch to sleep mode and display the status display after a configurable time without

any operator activity.

easyE4 02/24 MN050009EN Eaton.com

4.1 Base device with display and buttons

4. Operation

Table of Contents