Instrument Cluster Display Control Buttons; Engine Oil Change Reset - Fiat 500X 2020 Owner's Manual

Instrument Cluster Display Control Buttons

The system allows the driver to select informa-
tion by pushing the following buttons mounted
on the steering wheel:
Instrument Cluster Display Control Buttons
1 — Arrow Up/Down Scroll Through Menus And
Submenus
2 — Arrow Right/Left Access Information/Submenu
Screens
3 — OK Button For Selecting And Resetting Information
The instrument cluster display features a driver
interactive display that is located in the instru-
ment cluster. Pushing the controls on the left
side of the steering wheel allows the driver to
select vehicle information and Personal
Settings.
Push the up arrow button to scroll upward

through the main menus and submenus
(Speedometer, Trip, Drive Mode Selector,
Vehicle Info, Driver Assist, Audio, Phone, Navi-
gation, Messages, Settings).
Push the down arrow button to scroll downward

through the main menu and submenus (Speed-
ometer, Trip, Drive Mode Selector, Vehicle Info,
Driver Assist, Audio, Phone, Navigation,
Messages, Settings).
Push the right arrow button to access the infor-

mation screens or submenu screens of a main
menu item.
Push the back/left arrow button to access the

information screens or submenu screens of a
main menu item.
Push the OK button to access/select the infor-

mation screens or submenu screens of a main
menu item. Push and hold the OK button for
two seconds to reset displayed/selected
features that can be reset.
GETTING TO KNOW YOUR INSTRUMENT PANEL

Engine Oil Change Reset

Your vehicle may be equipped with an engine oil
change indicator system. The "Change Engine
Oil" message will display in the instrument
cluster display. The engine oil change indicator
system is duty cycle based, which means the
engine oil change interval may fluctuate, depen-
dent upon your personal driving style.
Unless reset, this message will continue to
display each time you turn the ignition switch to
the ON/RUN position. To reset the oil change
indicator system (after performing the sched-
uled maintenance), refer to the following proce-
dure.
1. Turn the ignition switch to the ON position
(do not start the engine).
2. Fully push the accelerator pedal slowly,
three times, within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK
position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator system
did not reset. If necessary, repeat this procedure.
73
3