Rain Sensor - If Equipped - Fiat 500X 2019 Owner's Manual

Rain Sensor — If Equipped
This feature senses moisture on the windshield and auto-
matically activates the wipers for the driver. The feature is
especially useful for road splash or overspray from the
windshield washers of the vehicle ahead. Rotate the end of
the multifunction lever to one of two settings to activate
this feature.
NOTE: If the end of the multifunction lever rotates from
the off (O) position to the first intermittent setting or from
the first intermittent setting to the second intermittent
setting, the wipers will perform a round up to clean the
windshield.
GETTING TO KNOW YOUR VEHICLE 65
Rain Sensor Location
The sensitivity of the system can be adjusted with the
multifunction lever. Wiper delay position one is the least
sensitive, and wiper delay position two is the most sensi-
tive. Setting one should be used for normal rain conditions,
and can be used if the driver desires less wiper sensitivity.
Setting two can be used if the driver desires more sensitiv-
ity. Place the wiper switch in the off (O) position when not
using the system.
NOTE:
• The Rain Sensing feature will not operate when the
wiper switch is in the low or high-speed position.
3