Advertisement
Available languages
Available languages
This premium installation kit is for 1974-2002 Ford/Chrysler/Lincoln/Mercury & Jeep Vehicles. Included
are all the parts you need to mount your car stereo or CD player into your vehicle's dash. Refer to the
individual instruction in this manual to remove your vehicle's factory radio and assemble the kit.
• See your vehicle's instructions for any special tools your installation might require.
• Read all instructions accompanying your car stereo for proper wiring and mounting instructions.
KIT INCLUDES:
• 2 Mounting Panels
• 2 "A" Brackets (Left & Right)
• 2 "B" Brackets (Left & Right)
The instructions for each vehicle
show which mounting panel
and brackets to use.
QUICK START GUIDE
INTRODUCTION
PRELIMINARY
BEFORE BEGINNING - Read QUICK START GUIDE PAGES 2-4
CAUTION: DISCONNECT YOUR VEHICLE'S NEGATIVE BATTERY TERMINAL
BEFORE THE INSTALLATION TO HELP PREVENT ELECTRICAL DAMAGE. WE
RECOMMEND THE USE OF A VOLT/OHM METER OVER A TEST LIGHT TO
CHECK WIRING. A TEST LIGHT OR GROUNDED WIRE PROBE CAN CAUSE
DAMAGE TO THE VEHICLE'S COMPUTER AND/OR DIAGNOSTIC SYSTEMS.
AVOID ALL FACTORY AIRBAG WIRING - AIRBAGS CAN ACCIDENTALLY
DEPLOY CAUSING SERIOUS INJURY OR DEATH.
PARTS LIST
• 2 "C" Brackets (Left & Right)
• 2 Spacers
ASSEMBLING THE KIT
#2190
PANEL
2
• 1 Hardware Pack
• 2 Tracer Bracket Spacers
SHAFT RADIO TABS ARE PROVIDED
BY REQUEST. PLEASE CALL TECH
SUPPORT IF INSTALLING A SHAFT
(3-HOLE) STYLE UNIT:
1-800-621-3695 X 3
Adaptodores para montar radios de
poste, disponible al pedirlo. Llame al
1-800-621-3695 X 3
Advertisement
