Parts Included - Scosche MagicMount UQ01 Manual

PARTS INCLUDED

1. (1) Direct Fit Bezel w/ MQUSM
2. (1) Vehicle Specific T-harness
3. (2) MAGICPLATE'"
4. (2) MAGICPLATE'" Applicator
5. (6) Double-sided Adhesive
MAGICPLATE'" MOUNTING OPTION 1
NOTE: For mounting directly to device, use the large single plate with template guide as
shown in the instructions below.
�move
the white
�
paper backing
·
from both plates
e
Line up the
corresponding
arrows on the
Template Guide to the to
the bottom of your phone.
MAGICPLATE'" MOUNTING OPTION 2
NOTE: For mounting directly to CASE, use the (2) small plates with the integrated template
guide as shown below.
0
Remove
the white
8
When
positioned,
press plates
firmly to affix
,
. · · · · • . . . . . .
. )
.
. ·
· . · · · · · · .
.
8
When
positioned,
press plates
firmly to affix
and remove
template.
REMOVING THE PLATE
Use a thin plastic card to carefully lift the plate's adhesive surface from
the mounting surface. Slowly lift up and remove the plate.
Do not use any heat or liquids to remove the plate, due to risk
damaging your phone. Contact Scosche Customer Service for any
additional assistance at 800.363.4490 Ext.
scosche.com
e
Line up the
corresponding
arrows on the
Template Guide to
the to the bottom of
your phone.
0
When
firmly to affix � ;;;.-:::
2
of
1 or customerservice@
,
e>