Scosche FCJ2076 Installation Kit page 19

1984-90 Ford Escort
1984-88 Ford EXP
1984-87 Mercury Lynx
RADIO REMOVAL:
1. Remove six screws from the radio trim panel. Remove the panel.
2. Remove four screws securing the radio/bracket assembly.
3. Pull the radio out of the cavity, and disconnect
the antenna and all speaker and electrical connections.
Remove the radio.
NOTE: INSTALLATION OF A DIN UNIT MAY REQUIRE
DASH MODIFICATIONS.
NOTA: La instalación de una unidad DIN puede requerir
modifcar el tablero del vehículo.
SECURE THE BRACKETS TO THE BOSSES LOCATED ON THE BACK
SIDE OF THE KIT WITH THE SUPPLIED HARDWARE. SEE PAGE 3.
Asegurar los braquetes en sus ranuras en la parte posterior del juego
usando los tornillos autoenroscantes provistos. Ver la página 3.
USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS
Usar las pestañas sombreadas y los braquetes indicados. Cortar las pestañas restantes y descartarlas.
1983-85 Ford LTD
1984-88 Mercury Marquis
RADIO REMOVAL:
1. Remove the radio knobs.
2. Open the ashtray and remove two screws
from the top of the ash tray cavity.
3. Remove the radio trim panel by pulling out the bottom
of the panel and sliding the panel over the ashtray face.
4. Remove four screws from the radio mounting plate
(shaft support plate). Pull the radio out of the
cavity, and disconnect the two wiring harnesses,
speakers and antenna lead. Remove the radio.
NOTE: INSTALLATION OF A DIN UNIT MAY REQUIRE
DASH MODIFICATIONS.
NOTA: La instalación de una unidad DIN puede requerir
modifcar el tablero del vehículo.
SECURE THE BRACKETS TO THE BOSSES LOCATED ON THE BACK SIDE
OF THE KIT WITH THE SUPPLIED HARDWARE. SEE PAGE 3.
Asegurar los braquetes en sus ranuras en la parte posterior del juego
usando los tornillos autoenroscantes provistos. Ver la página 3.
USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS
Usar las pestañas sombreadas y los braquetes indicados. Cortar las pestañas restantes y descartarlas.
1983-89 Ford Crown Victoria
1983-89 Mercury Grand Marquis
RADIO REMOVAL:
1. Remove four screws from the radio trim panel: two
inside the ashtray, and two from the top of the panel.
2. Remove the radio's knobs; pull the trim panel
out from the bottom and remove it.
3. Remove four screws securing the radio mounting
brackets to the dash and pull the assembly out.
4. Disconnect the power, antenna, and all speaker
and electrical connections.
NOTE: INSTALLATION OF A DIN UNIT MAY REQUIRE
DASH MODIFICATIONS.
NOTA: La instalación de una unidad DIN puede requerir
modifcar el tablero del vehículo.
SECURE THE BRACKETS TO THE BOSSES LOCATED ON THE BACK
SIDE OF THE KIT WITH THE SUPPLIED HARDWARE. SEE PAGE 3.
Asegurar los braquetes en sus ranuras en la parte posterior del juego
usando los tornillos autoenroscantes provistos. Ver la página 3.
USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS
Usar las pestañas sombreadas y los braquetes indicados. Cortar las pestañas restantes y descartarlas.
AND DISCARD. FOR DIN ISO INSTALLATION, SEE PAGE 4.
Para la instalación de radios DIN ISO ver la página 4.
AND DISCARD. FOR DIN ISO INSTALLATION, SEE PAGE 4.
Para la instalación de radios DIN ISO ver la página 4.
AND DISCARD. FOR DIN ISO INSTALLATION, SEE PAGE 4.
Para la instalación de radios DIN ISO ver la página 4.
19
Read pages 2-4
for kit assembly.
Read pages 2-4
for kit assembly.
Read pages 2-4
for kit assembly.