Scosche FCJ2076 Installation Kit page 23

1983-87 Lincoln Continental
RADIO REMOVAL:
1. Remove two screws from below the radio.
2. Open the ashtray and remove the two outside screws.
Carefully pull the radio trim panel off.
3. Remove four screws securing the radio bracket
to the dash. Carefully pull the radio out.
4. Disconnect the power, antenna, speakers,
and all electrical leads. Remove the radio.
NOTE: INSTALLATION OF A DIN UNIT MAY REQUIRE
DASH MODIFICATIONS.
NOTA: La instalación de una unidad DIN puede requerir
modifcar el tablero del vehículo.
SECURE THE BRACKETS TO THE BOSSES LOCATED ON THE BACK
SIDE OF THE KIT WITH THE SUPPLIED HARDWARE. SEE PAGE 3.
Asegurar los braquetes en sus ranuras en la parte posterior del juego
usando los tornillos autoenroscantes provistos. Ver la página 3.
USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS
Usar las pestañas sombreadas y los braquetes indicados. Cortar las pestañas restantes y descartarlas.
1984-89 Lincoln Continental Mark VII LSC
RADIO REMOVAL:
1. Carefully pull on the edges of the aluminum radio trim panel
to release the clips, and remove the trim panel.
2. Remove four screws which secure the radio to
the dash, and slide the radio out of the dash.
3. Disconnect the power, antenna, and all speaker
and electrical connections. Remove the radio.
NOTE: INSTALLATION OF A DIN UNIT MAY REQUIRE
DASH MODIFICATIONS.
NOTA: La instalación de una unidad DIN puede requerir
modifcar el tablero del vehículo.
SECURE THE BRACKETS TO THE BOSSES LOCATED ON THE BACK
SIDE OF THE KIT WITH THE SUPPLIED HARDWARE. SEE PAGE 3.
Asegurar los braquetes en sus ranuras en la parte posterior del juego
usando los tornillos autoenroscantes provistos. Ver la página 3.
USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS
Usar las pestañas sombreadas y los braquetes indicados. Cortar las pestañas restantes y descartarlas.
1984-89 Lincoln Town Car
RADIO REMOVAL:
1. Remove three screws from the radio trim below the dash.
2. Open out the 1-1/2'' wide plastic trim piece
above the radio trim.
3. Remove three screws from behind the trim.
Remove the instrument cluster trim panel.
4. Remove three screws which secure the radio
and the radio brackets to dash.
5. Disconnect the two wiring harnesses, antenna
lead and harness retaining clip. Remove the radio.
NOTE: INSTALLATION OF A DIN UNIT MAY REQUIRE
DASH MODIFICATIONS.
NOTA: La instalación de una unidad DIN puede requerir
modifcar el tablero del vehículo.
SECURE THE BRACKETS TO THE BOSSES LOCATED ON THE BACK
SIDE OF THE KIT WITH THE SUPPLIED HARDWARE. SEE PAGE 3.
Asegurar los braquetes en sus ranuras en la parte posterior del juego
usando los tornillos autoenroscantes provistos. Ver la página 3.
USE THE SHADED MOUNTING TABS AND THE INDICATED BRACKETS. CUT OFF THE REMAINING TABS
Usar las pestañas sombreadas y los braquetes indicados. Cortar las pestañas restantes y descartarlas.
AND DISCARD. FOR DIN ISO INSTALLATION, SEE PAGE 4.
Para la instalación de radios DIN ISO ver la página 4.
AND DISCARD. FOR DIN ISO INSTALLATION, SEE PAGE 4.
Para la instalación de radios DIN ISO ver la página 4.
AND DISCARD. FOR DIN ISO INSTALLATION, SEE PAGE 4.
Para la instalación de radios DIN ISO ver la página 4.
23
Read pages 2-4
for kit assembly.
Read pages 2-4
for kit assembly.
Read pages 2-4
for kit assembly.