Opening The Rear Window; How To Use The Rear Window Half-Lock; How To Use The Emergency Exit - Kubota MX Series Operator's Manual

CAB OPERATION

3. Opening the rear window

1. Turn the rear-window-handle clockwise to the
vertical position and push the rear-window-handle.
(1) Rear window handle
The rear window is opened by the gas-spring-
cylinder.
IMPORTANT :
• To maintain the visibility of the SMV
emblem, close the rear window when driving
on the road.
(1) SMV emblem
(2) Rear window
4. How to use the rear window half-
lock
IMPORTANT :
• Be careful not to travel the machine in the half-
lock mode on rough roads.
1. Grip the rear-window-handle, and slightly open the
rear window.
2. Adjust the half-lock bracket to the set position.
3. Move back the rear window a little, and get the rear-
window-handle locked.
106
(A) Open
(B) Close
(A) Close
(1) Rear window
(2) Rear window handle
IMPORTANT :
• When handling the half-lock mechanism,
hold up the window just before being
positioned and then slowly get it in position.

5. How to use the emergency exit

IMPORTANT :
• Open the right door of the cab if the left door is
blocked, and the opposite is also true in an
emergency situation.
• Exit through the rear window if the CAB doors
are blocked in an emergency situation.
1. Turn the handle-lock fully clockwise (if equipped).
DOOR AND WINDOW
(A) Half-lock bracket (storage
position)
(B) Half-lock bracket (set posi-
tion)
(C) Lock
(D) Unlock
MX5400,MX6000