Seat Belt; Head Light Switch; Head Light Switch; Hazard Light Switch - Kubota BX25DLB Operator's Manual

BSeat Belt
To avoid personal injury:
A Always use the seat belt when the ROPS is
installed.
Do not use the seat belt if a foldable ROPS is
down or there is no ROPS.
Adjust the seat belt for proper fit and connect to the
buckle. The seat belt is auto-locking retractable type.

(1) Seat belt

2. Select Light Switch Positions.
BHead Light Switch
(A) ...... Head lights "ON".
(B) ...... Head lights "OFF".
BHazard Light Switch
When hazard light switch is turned counter-clockwise, the
hazard lights flash along with the indicator on the
instrument panel. Turn the switch clockwise to turn off the
light.
(A) ...... Hazard lights "ON".
(B) ...... Hazard lights "OFF".
OPERATING THE TRACTOR
BTurn Signal Light Switch
To indicate a right turn, turn the switch clockwise.
To indicate a left turn, turn the switch counter-clockwise.
When the left or right turn signal is activated in
combination with the hazard lights, the indicated turning
light will flash and the other will stay on.
A Be sure to return switch to center position after turning.

(1) Hazard light switch

(2) Head light switch

(3) Turn signal light switch

3. Check the Brake Pedal.
BBrake Pedal
Make sure to latch the brake pedal with the parking brake
lock pedal. Use both right and left feet for the procedure.
To avoid personal injury:
A An accident may occur if the tractor is
suddenly braked, such as by heavy towed
loads shifting forward or loss of control.
A The braking characteristics
between 2 and 4-wheel drive. Be aware of the
difference and use carefully.
A When driving on icy, wet or loose surfaces,
make sure the tractor is correctly ballasted to
avoid skidding and loss of steering control.
Operate at reduced speed.
(A) "ON"
(B) "OFF"
(C) "RIGHT TURN"
(D) "LEFT TURN"
are different
31