Intended Use; Technical Specification; How The Assa Abloy Sw200 Works - Assa Abloy SW200 Owner's Manual

As your entrances are part of your business flow, there's every reason to keep
them working well. ASSA ABLOY Entrance Systems offers you a maintenance and
modernization expertise to rely on. Our Maintenance Programs and Modernization
Services for entrance automation is backed by a extensive expertise for all types
of pedestrian- and industrial door and docking systems, independent of brand.
At your disposal is a team of dedicated expert technicians, proven through decades
of maintenance, service and satisfied customers.

Intended use

The door is designed to offer continuous use, a high degree of safety and maximum lifetime.
The ASSA ABLOY SW200 is an automatic swing door operator developed to facilitate entrances to
buildings and within buildings.
The ASSA ABLOY SW200 is a combination of a Heavy Duty (HD) operator for large heavy doors as
well as an low energy electromechanical operator (LE), mainly suitable for almost all types of internal
swing doors - but also external doors. This operator will be mainly used in the health care sector.
The ASSA ABLOY SW200 swing door operator can be combined with a full range of sensor products
providing swing door safety.
The door is designed to offer continuous use, a high degree of safety and maximum lifetime. The
system is self-adjusting to the effects caused by normal variations in the weather conditions and to
minor friction changes caused by e.g. dust and dirt.
For escape in emergency situations the doorset is opened manually.
For installation and maintenance see Installation and Service manual 1007718.

Technical specification

Manufacturer:
Address:
Type:
Mains power supply:
Power consumption:
Standards:

How the ASSA ABLOY SW200 works

The swing door operator ASSA ABLOY SW200 uses a DC motor which is connected to the output
shaft by a combination of a bevel gear and spur gears. The arm system that is connected to the output
shaft opens the door in a wall mounted application.
There is also an adjustable spring mechanism connected to the output shaft. During opening of the
door, the clock spring is tensioned by the rotation of the output shaft. During the closing cycle, the
accumulated spring force is acting in the closing direction. The spring force can be adjusted so there
is appropriate force to close the door when it is operated manually or in case of a power failure.
To activate the operator you can use a manual activator (elbow switch) or an automatic activator
(radar device). It is also possible – where local standards allow – to activate the operator by just
pushing the door, if Push & Go is selected.
After the door has been activated it will open and stay open for a specified Hold Open Time (HOT).
When the HOT has elapsed the door will close.
The ASSA ABLOY SW200 can be set in three or four different modes, depending on optional pro-
gramme selector type, see table below.
In fully manual use (or in case of a power failure) the ASSA ABLOY SW200 acts as a normal door
closer.
6
ASSA ABLOY Entrance Systems
1900 Airport Road, Monroe, NC 28110, US
ASSA ABLOY SW200
120 V AC +10/-15%, 50/60 Hz
Max. 300 W
The ASSA ABLOY SW200 complies with ANSI/BHMA.
Issue 2018-03-28 1007717-en-US-3.0