Table of Contents
Advertisement
How the ASSA ABLOY SL500 Resilience works
The ASSA ABLOY sliding door operator ASSA ABLOY SL500 Resilience works
electromechanically. The motor, control unit, transmission – and optional emergency unit and
electromechanical locking device – are all assembled in a support beam with an integrated
cover. The motor and gear box transmit movement to the door leaves by means of a tooth
belt. The door leaf is fitted to a door adapter/carriage wheel fitting and hangs on a sliding
track. The guiding at the bottom is carried out by means of floor guides.
When an OPENING IMPULSE is received by the control unit the motor starts and transmits
movement to the door leaves, which move to the open position.
The closing starts when no OPENING IMPULSE is received and the HOLD OPEN TIME
has expired, and no PRESENCE IMPULSE is activated.
The ASSA ABLOY SL500 Resilience user can select five different modes of operation if an
operator mode selector is installed. See Operation mode selectors on page 8.
Technical specification
Manufacturer:
Address:
Type:
Mains power supply: 100 V AC -10% to 240 V AC +10%, 50/60 Hz
Power consumption: Max. 250 W
Standards:
Locking
Doors used for emergency escape in buildings such as hospitals and homes for elderly people
may not be locked or put in operate mode selection OFF mode. In other buildings emergency
escape doors may be locked or put in operate mode selection OFF mode after it has been secured
and all people have left the building.
Unlocking
Unlock all the mechanical locks before activating the operator.
6
ASSA ABLOY Entrance Systems Inc.
1900 Airport Road, Monroe, NC 28110, US
ASSA ABLOY SL500 Resilience
fuse 10 AT
The ASSA ABLOY SL500 Resilience complies with ANSI/BHMA.
Issue 2018-05-25
1018022-US-0.0
Advertisement
Table of Contents
