Section 6 - Operation; Controls - Miller Millermatic 355 Owner's Manual

6-1.

Controls

3
6
1 Auto-Set Button
Press to turn Auto-Set On or Off.
2 Pulse Button
Press to turn Pulse On or Off in the MIG
process.
3 USB Port
Use for software upgrade and collecting er-
ror codes.
OM-288360 Page 40
SECTION 6 – OPERATION
1
5
The USB port can be used to charge cell
phones and similar devices.
With the use of the optional Demo Cable kit
(289696), the User Interface can be pow-
ered without the need to connect to wall
power.
4 Power Switch
Use switch to turn unit On or Off.
5 Color LCD Display
6 Left Knob
2
8
Use left knob to adjust voltage in MIG mode,
Arc length in Pulsed MIG mode, or change
parameter values in Set-up mode.
7 Right Knob
Use right knob to adjust wire feed speed or
change parameter values in Set-up mode.
8 Soft Keys
Multiple functions depending on which
screen is being displayed.
4
ON
OFF
279061-E
7