Using Auto-Set; Elite - Miller Millermatic 355 Owner's Manual

6-3.

Using Auto-Set

12
10
11
8
1 Auto-Set Button
Press to turn Auto-Set On or Off.
2 Pulse Button
Press to turn Pulse On or Off..
3 Material/Gas Left Button
4 Material/Gas Right Button
Press to select material and gas. Left button
moves cursor to the left, right button moves
cursor to the right.
5 Diameter Button
Selects the size of the wire.
OM-288360 Page 42

Elite

™
1
3 4
6 Material Thickness Left Button
7 Material Thickness Right Button
Use to select material thickness. Left button
moves cursor to the left, right button moves
cursor to the right.
8 Left Knob
Use left knob to fine tune voltage in MIG
mode or arc length in Pulsed MIG mode
9 Right Knob
Use right knob to fine tune wire feed speed.
2
6
5 7
�
10 Welding Output Icon
When visible, indicates weld output is on.
11 Improper Weld Polarity Icon
When visible, indicates electrode and work
cables need to be switched.
12 Bullseye Indicator
Represents factory default settings.
ON
OFF
ON
OFF
9
279061-E
When using a spoolgun or push-pull
gun in Auto-Set, the potentiometer on
the gun can be used to control wire
feed speed.